Mohamed M. Atalla

The MOSFET was the first truly compact transistor that could be miniaturised and mass-produced for a wide range of uses, and went on to revolutionize the electronics industry. The MOSFET forms the basis of modern electronics, and is the basic element in most modern electronic equipment. It is the most widely used semiconductor device in the world, and the most widely manufactured device in history, with an estimated 13 sextillion MOS transistors manufactured as of 2018. The MOSFET is central to the microelectronics revolution, silicon revolution, and microcomputer revolution, and is the fundamental building block of modern digital electronics during the Digital Revolution, information revolution and Information Age. It is used in a wide variety of electronics applications, such as computers, synthesizers, communications technology, smartphones, Internet infrastructure, digital telecommunication systems, video games, pocket calculators, and digital wristwatches, among many other uses. It has been described as the "workhorse of the electronics industry" due to being the building block of every microprocessor, memory chip and telecommunication circuit in use. The US Patent and Trademark Office calls the MOSFET a "groundbreaking invention that transformed life and culture around the world". The invention of the MOSFET by Atalla and Kahng has been credited as "the birth of modern electronics" and is considered to be possibly the most important invention in electronics.

In 2014, the 1959 invention of the MOSFET was included on the list of IEEE milestones in electronics. In 2015, Atalla was inducted into the IT History Society's IT Honor Roll for his important contributions to information technology.

As of 2013, 250 million card transactions are protected by Atalla products every day.

His invention of the MOSFET was initially overlooked at Bell, which led to his resignation from Bell and joining Hewlett-Packard (HP), founding its Semiconductor Lab in 1962 and then HP Labs in 1966, before leaving to join Fairchild Semiconductor, founding its Microwave & Optoelectronics division in 1969. His work at HP and Fairchild included research on Schottky diode, gallium arsenide (GaAs), gallium arsenide phosphide (GaAsP), indium arsenide (InAs) and light-emitting diode (LED) technologies. He later left the semiconductor industry, and became an entrepreneur in cryptography and data security. In 1972, he founded Atalla Corporation, and filed a patent for a remote Personal Identification Number (PIN) security system. In 1973, he released the first hardware security module, the "Atalla Box", which encrypted PIN and ATM messages, and went on to secure the majority of the world's ATM transactions. He later founded the Internet security company TriStrata Security in the 1990s. In recognition of his work on the PIN system of information security management as well as cybersecurity, Atalla has been referred to as the "Father of the PIN" and an information security pioneer. He died in Atherton, California, on December 30, 2009.

He lived in Atherton, California. Atalla died on December 30, 2009, in Atherton.

In 2009, he was inducted into the National Inventors Hall of Fame for his important contributions to semiconductor technology as well as data security. He was referred to as one of the "Sultans of Silicon" along with several other semiconductor pioneers.

The Atalla Box protected over 90% of all ATM networks in operation as of 1998, and secured 85% of all ATM transactions worldwide as of 2006. Atalla products still secure the majority of the world's ATM transactions, as of 2014.

As a result of these activities, he founded the company TriStrata Security in 1996. In contrast to most conventional computer security systems at the time, which built walls around a company's entire computer network to protect the information within from thieves or corporate spies, TriStrata took a different approach. Its security system wrapped a secure, encrypted envelope around individual pieces of information (such as a word processing file, a customer database, or e-mail) that can only be opened and deciphered with an electronic permit, allowing companies to control which users have access to this information and the necessary permits. It was considered a new approach to enterprise security at the time.

It was not long until several executives of large banks persuaded him to develop security systems for the Internet to work. They were worried about the fact that no useful framework for electronic commerce would have been possible at that time without innovation in the computer and network security industry. Following a request from former Wells Fargo Bank president William Zuendt in 1993, Atalla began developing a new Internet security technology, allowing companies to scramble and transmit secure computer files, e-mail, and digital video and audio, over the internet.

In 1987, Atalla Corporation merged with Tandem Computers. Atalla went into retirement in 1990.

At the National Association of Mutual Savings Banks (NAMSB) conference in January 1976, Atalla announced an upgrade to its Identikey system, called the Interchange Identikey. It added the capabilities of processing online transactions and dealing with network security. Designed with the focus of taking bank transactions online, the Identikey system was extended to shared-facility operations. It was consistent and compatible with various switching networks, and was capable of resetting itself electronically to any one of 64,000 irreversible nonlinear algorithms as directed by card data information. The Interchange Identikey device was released in March 1976. It was one of the first products designed to deal with online transactions, along with Bunker Ramo Corporation products unveiled at the same NAMSB conference. In 1979, Atalla introduced the first network security processor (NSP).

Atalla was awarded the Stuart Ballantine Medal (now the Benjamin Franklin Medal in physics) at the 1975 Franklin Institute Awards, for his important contributions to silicon semiconductor technology and his invention of the MOSFET. In 2003, Atalla received a Distinguished Alumnus doctorate from Purdue University.

He left the semiconductor industry in 1972, and began a new career as an entrepreneur in data security and cryptography. In 1972, he founded Atalla Technovation, later called Atalla Corporation, which dealt with safety problems of banking and financial institutions.

In 1972, Atalla filed U.S. Patent 3,938,091 for a remote PIN verification system, which utilized encryption techniques to assure telephone link security while entering personal ID information, which would be transmitted as encrypted data over telecommunications networks to a remote location for verification. This was a precursor to telephone banking, Internet security and e-commerce.

The work of Atalla in the early 1970s led to the use of high security modules. His "Atalla Box", a security system which encrypts PIN and ATM messages, and protected offline devices with an un-guessable PIN-generating key. He commercially released the "Atalla Box" in 1973. The product was released as the Identikey. It was a card reader and customer identification system, providing a terminal with plastic card and PIN capabilities. The system was designed to let banks and thrift institutions switch to a plastic card environment from a passbook program. The Identikey system consisted of a card reader console, two customer PIN pads, intelligent controller and built-in electronic interface package. The device consisted of two keypads, one for the customer and one for the teller. It allowed the customer to type in a secret code, which is transformed by the device, using a microprocessor, into another code for the teller. During a transaction, the customer's account number was read by the card reader. This process replaced manual entry and avoided possible key stroke errors. It allowed users to replace traditional customer verification methods such as signature verification and test questions with a secure PIN system.

In 1969, he left HP and joined Fairchild Semiconductor. He was the vice president and general manager of the Microwave & Optoelectronics division, from its inception in May 1969 up until November 1971. He continued his work on light-emitting diodes (LEDs), proposing they could be used for indicator lights and optical readers in 1971. He later left Fairchild in 1972.

Atalla helped create HP Labs in 1966. He directed its solid-state division.

He continued research on Schottky diodes, while working with Robert J. Archer, at HP Associates. They developed high vacuum metal film deposition technology, and fabricated stable evaporated/sputtered contacts, publishing their results in January 1963. Their work was a breakthrough in metal–semiconductor junction and Schottky barrier research, as it overcame most of the fabrication problems inherent in point-contact diodes and made it possible to build practical Schottky diodes.

In 1962, Atalla joined Hewlett-Packard, where he co-founded Hewlett-Packard and Associates (HP Associates), which provided Hewlett-Packard with fundamental solid-state capabilities. He was the Director of Semiconductor Research at HP Associates, and the first manager of HP's Semiconductor Lab.

Atalla proposed the concept of the MOS integrated circuit chip in 1960. He noted that the MOS transistor's ease of fabrication made it useful for IC chips. However, Bell Labs initially ignored MOS technology, as the company was not interested in ICs at the time. Despite this, the MOSFET generated significant interest at RCA and Fairchild Semiconductor. Inspired by the first MOSFET demonstration by Atalla and Kahng in early 1960, researchers at RCA and Fairchild fabricated MOSFETs later that year, with Karl Zaininger and Charles Meuller fabricating a MOSFET at RCA, and Chih-Tang Sah building an MOS-controlled tetrode at Fairchild. His concept of the MOS IC chip eventually became reality, starting with an experimental MOS chip demonstrated by Fred Heiman and Steven Hofstein at RCA in 1962, after which MOS would become the dominant fabrication process for IC chips. CMOS, which uses complementary pairs of PMOS and NMOS transistors, was later developed by Chih-Tang Sah and Frank Wanlass at Fairchild in 1963. The development of MOS technology, which was capable of increasing miniaturisation, eventually became the focus of RCA, Fairchild, Intel and other semiconductor companies in the 1960s, fuelling the technological and economic growth of the early semiconductor industry in California (centred around what later became known as Silicon Valley) as well as Japan.

In 1960, Atalla and Kahng fabricated the first MOSFET with a gate oxide thickness of 100 nm, along with a gate length of 20 µm. In 1962, Atalla and Kahng fabricated a nanolayer-base metal–semiconductor junction (M–S junction) transistor. This device has a metallic layer with nanometric thickness sandwiched between two semiconducting layers, with the metal forming the base and the semiconductors forming the emitter and collector. With its low resistance and short transit times in the thin metallic nanolayer base, the device was capable of high operation frequency compared to bipolar transistors. Their pioneering work involved depositing metal layers (the base) on top of single crystal semiconductor substrates (the collector), with the emitter being a crystalline semiconductor piece with a top or a blunt corner pressed against the metallic layer (the point contact). They deposited gold (Au) thin films with a thickness of 10 nm on n-type germanium (n-Ge), while the point contact was n-type silicon (n-Si). Atalla resigned from BTL in 1962.

Extending their work on MOS technology, Atalla and Kahng next did pioneering work on hot carrier devices, which used what would later be called a Schottky barrier. The Schottky diode, also known as the Schottky-barrier diode, was theorized for years, but was first practically realized as a result of the work of Atalla and Kahng during 1960–1961. They published their results in 1962 and called their device the "hot electron" triode structure with semiconductor-metal emitter. It was one of the first metal-base transistors. The Schottky diode went on to assume a prominent role in mixer applications.

At the Semiconductor Lab during the 1960s, he launched a material science investigation program that provided a base technology for gallium arsenide (GaAs), gallium arsenide phosphide (GaAsP) and indium arsenide (InAs) devices. These devices became the core technology used by HP's Microwave Division to develop sweepers and network analyzers that pushed 20–40 GHz frequency, giving HP more than 90% of the military communications market.

Atalla first published his findings in BTL memos during 1957, before presenting his work at an Electrochemical Society meeting in 1958, the Radio Engineers' Semiconductor Device Research Conference. The semiconductor industry saw the potential significance of Atalla's surface oxidation method, with RCA calling it a "milestone in the surface field." The same year, he made further refinements to the process with his colleagues Eileen Tannenbaum and Edwin Joseph Scheibner, before they published their results in May 1959. According to Fairchild Semiconductor engineer Chih-Tang Sah, the surface passivation process developed by Atalla and his team "blazed the trail" that led to the development of the silicon integrated circuit. Atalla's silicon transistor passivation technique by thermal oxide was the basis for several important inventions in 1959: the MOSFET (MOS transistor) by Atalla and Dawon Kahng at Bell Labs, the planar process by Jean Hoerni at Fairchild Semiconductor, and the monolithic integrated circuit chip by Robert Noyce at Fairchild in 1959. By the mid-1960s, Atalla's process for oxidized silicon surfaces was used to fabricate virtually all integrated circuits and silicon devices. In addition to silicon semiconductor technology, the surface passivation process is also critical to solar cell and carbon quantum dot technologies.

Between 1956 and 1960, Atalla led a small team of several BTL researchers, including Eileen Tannenbaum, Edwin Joseph Scheibner and Dawon Kahng. They were new recruits at BTL, like himself, with no senior researchers on the team. Their work was initially not taken seriously by senior management at BTL and its owner AT&T, due to the team consisting of new recruits, and due to the team leader Atalla himself coming from a mechanical engineering background, in contrast to the physicists, physical chemists and mathematicians who were taken more seriously, despite Atalla demonstrating advanced skills in physical chemistry and semiconductor physics.

Despite working mostly on their own, Atalla and his team made significant advances in semiconductor technology. According to Fairchild Semiconductor engineer Chih-Tang Sah, the work of Atalla and his team during 1956–1960 was "the most important and significant technology advance" in silicon semiconductor technology, including the history of transistors and microelectronics.

He made a breakthrough with his development of the surface passivation process. This is the process by which a semiconductor surface is rendered inert, and does not change semiconductor properties as a result of interaction with air or other materials in contact with the surface or edge of the crystal. The surface passivation process was first developed by Atalla in the late 1950s. He discovered that the formation of a thermally grown silicon dioxide (SiO2) layer greatly reduced the concentration of electronic states at the silicon surface, and discovered the important quality of SiO2 films to preserve the electrical characteristics of p–n junctions and prevent these electrical characteristics from deteriorating by the gaseous ambient environment. He found that silicon oxide layers could be used to electrically stabilize silicon surfaces. He developed the surface passivation process, a new method of semiconductor device fabrication that involves coating a silicon wafer with an insulating layer of silicon oxide so that electricity could reliably penetrate to the conducting silicon below. By growing a layer of silicon dioxide on top of a silicon wafer, Atalla was able to overcome the surface states that prevented electricity from reaching the semiconducting layer. His surface passivation method was a critical step that made possible the ubiquity of silicon integrated circuits, and later became critical to the semiconductor industry. For the surface passivation process, he developed the method of thermal oxidation, which was a breakthrough in silicon semiconductor technology.

Born in Port Said, Egypt, he was educated at Cairo University in Egypt and then Purdue University in the United States, before joining Bell Labs in 1949 and later adopting the more anglicized "John" or "Martin" M. Atalla as professional names. He made several important contributions to semiconductor technology at Bell, including his development of the surface passivation and thermal oxidation processes (the basis for silicon semiconductor technology such as the planar process and monolithic integrated circuit chips), his invention of the MOSFET with Kahng in 1959, and the PMOS and NMOS fabrication processes. Atalla's pioneering work at Bell contributed to modern electronics, the silicon revolution, and Digital Revolution. The MOSFET in particular is the basic building block of modern electronics, and is considered one of the most important inventions in electronics. It is also the most widely manufactured device in history, and the US Patent and Trademark Office calls it a "groundbreaking invention that transformed life and culture around the world".

After completing his PhD at Purdue University, Atalla was employed at Bell Telephone Laboratories (BTL) in 1949. In 1950, he began working at Bell's New York City operations, where he worked on problems related to the reliability of electromechanical relays, and worked on circuit-switched telephone networks. With the emergence of transistors, Atalla was moved to the Murray Hill lab, where he began leading a small transistor research team in 1956. Despite coming from a mechanical engineering background and having no formal education in physical chemistry, he proved himself to be a quick learner in physical chemistry and semiconductor physics, eventually demonstrating a high level of skill in these fields. He researched, among other things, the surface properties of silicon semiconductors and the use of silica as a protective layer of silicon semiconductor devices. He eventually adopted the alias pseudonyms "Martin" M. Atalla or "John" M. Atalla for his professional career.

Mohamed Mohamed Atalla was born in Port Said, Egypt. He studied at Cairo University in Egypt, where he received his Bachelor of Science degree. He later moved to the United States to study mechanical engineering at Purdue University. There, he received his master's degree (MSc) in 1947 and his doctorate (PhD) in 1949, both in mechanical engineering. His MSc thesis was "High Speed Flow in Square Diffusers" published in 1948, and his PhD thesis was "High Speed Compressible Flow in Square Diffusers" published in January 1949.

Mohamed M. Atalla (Arabic: محمد عطاالله; August 4, 1924 – December 30, 2009) was an Egyptian-American engineer, physicist, cryptographer, inventor and entrepreneur. He was a semiconductor pioneer who made important contributions to modern electronics. He is best known for inventing the MOSFET (metal–oxide–semiconductor field-effect transistor, or MOS transistor) in 1959 (along with his colleague Dawon Kahng), which along with Atalla's earlier surface passivation and thermal oxidation processes, revolutionized the electronics industry. He is also known as the founder of the data security company Atalla Corporation (now Utimaco Atalla), founded in 1972. He received the Stuart Ballantine Medal (now the Benjamin Franklin Medal in physics) and was inducted into the National Inventors Hall of Fame for his important contributions to semiconductor technology as well as data security.

Building on his earlier pioneering research on the surface passivation and thermal oxidation processes, Atalla developed the metal–oxide–semiconductor (MOS) process. Atalla then proposed that a field effect transistor–a concept first envisioned in the 1920s and confirmed experimentally in the 1940s, but not achieved as a practical device—be built of metal-oxide-silicon. Atalla assigned the task of assisting him to Dawon Kahng, a Korean scientist who had recently joined his group. That led to the invention of the MOSFET (metal–oxide–semiconductor field-effect transistor) by Atalla and Kahng, in November 1959. Atalla and Kahng first demonstrated the MOSFET in early 1960. With its high scalability, and much lower power consumption and higher density than bipolar junction transistors, the MOSFET made it possible to build high-density integrated circuit (IC) chips.